Product Range

QuadGrabber - 4-Channel Video Capture and Overlay Controller for PC/104-Plus


General EnquiriesTechnical Support
 
Sahre This Get our newsletter
 
The QuadGrabber is a 4-channel video capture and overlay controller on a single PC/104-Plus card providing a simple solution for capturing four concurrent analog video inputs for local system display or software analysis and processing. The QuadGrabber allows each of the 4 video channels to be captured at full D1 size, all at full frame rate and then scaled, cropped and positioned under software control. In addition to the video capture, the QuadGrabber also provides capture of up to 4 mono audio sources. The captured video data can be streamed continuously to system memory for immediate local display or further processing. The capture engine of the QuadGrabber features hardware color space conversion to present the captured video data in the format best suited to the end application.

 

Highlights

  • Supports 4 NTSC / RS-170, PAL / CCIR, SECAM analog video sources
  • 4 x D1 size image capture at full frame rate
  • 4 channel audio encoder
  • Arbitrary video window sizing, cropping and scaling
  • Windows DirectShow/DirectDraw support
  • Linux Video4Linux support
  • Low power PC/104-Plus form factor
  • PC/104-Plus 3.3v Add-in module
  • Operating temperature: 0°C to +60°C or -40°C to +85°C

Software Development Kits

The QuadGrabber is supported by comprehensive and well supported software development kits (SDKs) for video capture and windowing. The SDKs are designed to significantly reduce development time in Windows, Linux and QNX environments and include support libraries, drivers and example applications to help developers fully utilize the QuadGrabber features in complex frame grabber applications.

Block Diagram


Block Diagram

Example Video Capture Modes

PC/104-Plus Bus Interface

  • Compliant with PCI Rev. 2.1
  • 132MBytes/sec bandwidth at 33.33 MHz bus speed
  • Live video capture to display, memory or disk

Analog Video Input

  • Up to 4 concurrent composite PAL or NTSC video input channels
  • Four 10-bit Analog-to-Digital converters
  • Anti-aliasing filters on inputs

Video Input Formats

  • NTSC-M, NTSC-Japan, NTSC (4.43), RS-170
  • PAL-B,G,N, PAL-D, PAL-H, PAL-I, PAL-M, PAL-CN, PAL-60
  • SECAM

Video Input Adjustments

  • Contrast (or luma gain) adjustable from 0 - 255% of original
  • Saturation (or chroma gain) adjustable from 0 - 200% of original
  • Hue (or chroma phase) adjustable from 36 to +36
  • Brightness (or luma level) can be adjusted from 128 to 127 steps
  • Software adjustable Sharpness, Gamma and noise suppression

Video Capture Formats

  • RGB
  • YCbCr 4:2:2
  • YCbCr 4:1:1

Audio Inputs

  • 4 mono audio inputs
  • 10-bit Analog-to-Digital Converter per channel

Audio Capture Format

  • 8-bit PCM

Video Processing

  • Arbitrary sizing, cropping, scaling of each video channel

System Requirements

  • x86 PC-Compatible PC104plus Host Computer
  • PCI or AGP Display (if Video Preview to host is required)

Miscellaneous

  • Single +5V supply
  • Operating temp 0C to 60C
  • Operating temp 40C to +85C (extended temp option)
  • PC/104-Plus form factor

Software Drivers

  • Drivers for Windows XP, Linux
  • Sample video overlay and capture application in C/C++ source code
 

The following order codes can be used when ordering the QuadGrabber

QuadGrabber - Video Capture and Overlay Controller (0 to 60C)
QuadGrabber-Ext - Video Capture and Overlay Controller (-40C to +85C)

Please complete the form below for further information (* - Required).

 











  captcha image
 
Webrex Web Design