DVISTANAG

Click image to enlarge DVISTANAG
DVI-to-STANAG3350 Converter

The DVISTANAG is a scan converter module that accepts standard compliant DVI or HDMI signals at up to 1280 x 1024 resolution for conversion to high-quality STANAG 3350 compliant signals.

The DVISTANAG features high-speed signal capture, video scaling and frame rate conversion, and a timing generator. This provides seamless and automatic conversion of progressive DVI input to Interlaced RGB output conforming to STANAG 3350 requirements.

The STANAG 3350 video is output as separate red, green, blue signals with the video synchronization pulses embedded in the green signal. The DVISTANAG can be factory configured for Class A, Class B or Class C operation allowing it to be used immediately with no additional setup required.

The DVISTANAG is an intelligent stand-alone device with its own on-board CPU and does not require a host CPU or any special device driver software. For mechanical convenience, it can be mounted on a PCI-104 stack but will not consume any host CPU resources.

NB: Preliminary Information Subject To Change

Highlights

  • Converts DVI/HDMI to STANAG 3350 output
  • STANAG 3350 compliant Class A, Class B and Class C
  • Separate RGB outputs with sync-on-green
  • Supports up to 1280 x 1024 DVI/HDMI resolution input
  • Standard PCI-104 mechanical form factor
  • Stand-alone operation and O/S-neutral
  • Compact 3.8” x 4.5” PCI-104 stackable card form factor
  • Single +5V power supply

Applications

  • Aerospace instrumentation
  • Instrument panel
  • Video surveillance
  • Retrofit, refurbishment, and upgrade
  • Multi-function display (MFD) applications
Supported Platforms n/a
PCI-104 Bus Interface
  • Does not require PCI bus signal connection (on board MPU)
  • Remote or stand-alone operation
  • Mechanical mounting for PCI-104 stack
DVI/HDMI Video Input
  • DVI/HDMI Progressive input
  • Automatic detection of input resolution
  • Up to 1280 x 1024 SXGA input resolution
Video Input Resolutions
  • SVGA:    800 x 600
  • XGA:      1024 x 768
  • SXGA:    1280 x 1024
STANAG3350 Analog Video Output
  • 10-bit digital-to-analog conversion
  • Red, Sync-on-Green, Blue
  • Supported output standards:
    • STANAG 3350 Class A  875 lines @ 30 fps (based on RS-343)
    • STANAG 3350 Class B  625 lines @ 25 fps (based on PAL)
    • STANAG 3350 Class C  525 lines @ 30 fps (based on NTSC RS-170A)
Miscellaneous
  • Single +5V supply
  • Extended Temperature -40°C to +85°C (option)
  • Standard 4.5 x 3.8in PCI-104 form factor (with I/O extensions)
DVISTANAG Block Diagram

Order Enquiry for DVISTANAG

Product Codes
  • DVISTANAG-A-Ext - STANAG-Class-A Output (-40 to +85°C)
  • DVISTANAG-B-Ext - STANAG-Class-B Output (-40 to +85°C)
  • DVISTANAG-C-Ext - STANAG-Class-C Output (-40 to +85°C)
  • Your Details

  • Delivery Address

  • Requirements

  • This field is for validation purposes and should be left unchanged.